O
Ole Fella
Greetings guys
i was hoping you might help an old fella out with what ill seem rather simple issue for you tech savey guys in regards to the programming of my veissmann combi boiler.
we have Installed as mentioned above the veissmann vitodens 222F combi gas boiler with the vitotronic 200 control unit. we have been using only the central heating side of the unit to heat our house as we have had individual electric water heating for our potable water ( bathrooms/ kitchen)
we have recently renovated a new bathroom and made a plumbing connection to the boiler but im unable to get the hot water working .... i can either have the house warm or have a nice hot shower i cant seem to get both.
i beleive this unit only has a single internal pump what has to be used by both the rads and the DHW but only one at a time. so my thinking is that it has to do with the timing programs of the DHW.
ive got the Rad room temp set at 22 and timer set to 6.00 to 22.00 ( this works great with no problems )
when i go into the DHW settings and raise the temp to 50C ( the recommended temp) i can hear the hot water being created and fill up the ho****er storage tank (i assume) and i can have a hot shower but in doing this it turns of the Radiators and they never turn back on again untill i drop the DHW temp back down to 30 than i hear the burner turn back on and how water return back to the radiators.
im sure it has to do with the program times.
for those familiar with this boiler and the vitotronic 200... this is what im trying to acheive ...
rads on between 6.00am -10pm
DHW on between 7-9am and 4-8pm
and also hot water on demand at all times ( as i understand this is water that is created outside of these preset times that is instantly created
not sure if this is poossible but logic would say that it is but im just unable to figure it out.
any help would be greatly appreaceated and it will make that wife happy :blush5:
i was hoping you might help an old fella out with what ill seem rather simple issue for you tech savey guys in regards to the programming of my veissmann combi boiler.
we have Installed as mentioned above the veissmann vitodens 222F combi gas boiler with the vitotronic 200 control unit. we have been using only the central heating side of the unit to heat our house as we have had individual electric water heating for our potable water ( bathrooms/ kitchen)
we have recently renovated a new bathroom and made a plumbing connection to the boiler but im unable to get the hot water working .... i can either have the house warm or have a nice hot shower i cant seem to get both.
i beleive this unit only has a single internal pump what has to be used by both the rads and the DHW but only one at a time. so my thinking is that it has to do with the timing programs of the DHW.
ive got the Rad room temp set at 22 and timer set to 6.00 to 22.00 ( this works great with no problems )
when i go into the DHW settings and raise the temp to 50C ( the recommended temp) i can hear the hot water being created and fill up the ho****er storage tank (i assume) and i can have a hot shower but in doing this it turns of the Radiators and they never turn back on again untill i drop the DHW temp back down to 30 than i hear the burner turn back on and how water return back to the radiators.
im sure it has to do with the program times.
for those familiar with this boiler and the vitotronic 200... this is what im trying to acheive ...
rads on between 6.00am -10pm
DHW on between 7-9am and 4-8pm
and also hot water on demand at all times ( as i understand this is water that is created outside of these preset times that is instantly created
not sure if this is poossible but logic would say that it is but im just unable to figure it out.
any help would be greatly appreaceated and it will make that wife happy :blush5: