Vitra dual flush toilet constantly running | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Vitra dual flush toilet constantly running in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
3
Bit of advice please. I'm trying to remove and clean the flush valve washer as I suspect it's either worn or needs a clean. (Toilet is not filling and emptying water straight out into the bowl). However, from reading a post on here it appears that I may have to give the unit a 90 degree turn to remove, but it's just not budging. Without wishing to break the unit, am I just being daft and missing something obvious? (Picture attached with the offending catch and there is a second one on the opposite side). Cheers.

20170910_125352.jpg
 
Turn it anti clockwise

It will be stiff but should come out
 
Status
Not open for further replies.

Similar plumbing topics

When you say 'cleaned the bottom of the tank'...
Replies
4
Views
1K
  • Question
If you mean the screw fitting that holds the...
Replies
2
Views
423
Yes that’s the one I’m trying to turn. In the...
Replies
5
Views
1K
1/4" from the bottom of the cistern sounds a...
2
Replies
40
Views
6K
I think the sand/grit around the cover is from...
Replies
8
Views
2K
Back
Top