Vokera 29 compact problem. | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Vokera 29 compact problem. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
W

wx53bfo

Just before Xmas the boiler locked its self out (red light). Loosing pressure recharging a few times a day.Reset boiler as per instructions. Done it again. Reset called landlord sent engineer out. He reset system and said nothing wrong. Ring if it goes over 3 bar.......

Air in rads bled system recharged to 1.0 bar. Hot water from tap ok it you run it slow and not fully open tap (then goes cold).

System lost pressure redone above as air in rads. Now thinking leak in rads. When re pressuring system only takes a few seconds.

Closed feed and return to rads at boiler left it over night, next morning no pressure in boiler.

Condensate pipe.

Undone push fitting its dry. Just before putting it back ( boiler turned off ) whole load of of water, black gunk and fine bits of limescale came out. Waited for it to stop then put push fitting back.

Recharged system and turned on.

Loss of pressure in about 1 hour, rads filling with air up stairs and condensate pipe now warm.

Got engineer coming out again today.

I know nothing about boilers and dont want to leave it to the pros. I am just trying to eliminate the pipe work to the rads and the rads.

What are the chances of a duff heat ex-changer or expansion vessel or both.

Any thoughts ?
 
If you isolated the rads and there was then no pressure in the boiler, it's the boiler. You therefore need a pro ( gas safe registered engineer)
 
The compacts seem to have had this issue, let the engineer know your views and let him deal with it buddy :)
 
Make sure the eng is gas safe registered and badger onto the landlord a decent engineer can sort this
 
Status
Not open for further replies.

Similar plumbing topics

I once had a similar experience with my old...
Replies
6
Views
856
Thanks John. Perfect. Much appreciated.
Replies
12
Views
2K
You got your colours muddled. The black needle...
Replies
8
Views
977
I've tidied up this thread and banned a user...
Replies
2
Views
744
So today the 1.65gph nozzle finally arrived...
Replies
17
Views
3K
Back
Top