Vokera 29HE air pressure switch issues | Air Sourced Heat Pumps | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Vokera 29HE air pressure switch issues in the Air Sourced Heat Pumps area at Plumbers Forums

Nico

Gas Engineer
Messages
79
Hi Guys was wondering if someone could help me out with a Vokera compact 29HE. Had been called out it last year and boiler was only firing up with cover off so replaced fan venturis. Called back today and venturis are clean. Heat exchanger is spotless with no debris between fins causing flow restriction and no obstruction in flue. Has anyone else had similar issues with these boilers and any advice on what else I should be looking out for? Could it be the DPS although it is making with the cover off?

Cheers
 
I’m not sure if this can be discussed in the public forum? Anyway is it a Horizontal or vertical flue? Have you sampled/checked the air intake? What’s the ratio like?
I thought I had put this in the gas engineers forum? I hadn't checked the ratio yet as it's being held off by the APS unless I take the cover off. I didnt have a new seal to check the inside of the condenser yet so I am going back tomorrow to inspect that aswell.

It's a horizontal flue just straight out the back. I didnt check the ratio
I’m not sure if this can be discussed in the public forum? Anyway is it a Horizontal or vertical flue? Have you sampled/checked the air intake? What’s the ratio like?

I hadn't done because it was being held off by APS unless I took the cover off so thought the issue was before the combustion side of things. I didnt have a seal for the condenser so I am going back tomorrow to inspect inside of that. It's a horizontal flue just straight out the back.
 

Similar plumbing topics

  • Question
What is your source of hot water? What bar...
Replies
2
Views
733
S
OK then, good luck with it 👍👍
Replies
3
Views
1K
C
Needs a decent service also a couple of parts...
Replies
1
Views
1K
Thanks John. Perfect. Much appreciated.
Replies
12
Views
2K
  • Question
This issue arose about a year ago. Does anyone...
Replies
0
Views
653
Back
Top