vokera compact 25 | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss vokera compact 25 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
1,582
goes through correct sequence burns for a while and knocks of, "punters description",they also said a plumber told them it was scaled up causing the problem, i am going on monday,i've only ever been to one vokera and i ended up changing that, so any pre knowledge you can give me regarding the compact would be appreciated and don't say, don't go..!thanks in advance.
 
if everything works fine and heats up for a little bit then goes out, i'd say thermista
 
Get a set of MI's. The warning light sequence/colours may point you in right direction. Thermistors are quite a common issue with Vokeras.
 
Status
Not open for further replies.

Similar plumbing topics

    • Like
Update, diagnosis correct, reconditioned board...
Replies
2
Views
1K
  • Locked
check the min settings could be it runs in hw...
Replies
2
Views
78
if you upped the trac to 32mm you ivt would be...
Replies
19
Views
344
great, thanks for sharing, really difficult to...
Replies
2
Views
2K
J
  • Locked
i would tend to agree with Elgordo (sounds...
Replies
4
Views
99
Deleted member 44451
D
Back
Top