T tinbasher Messages 14 Nov 10, 2018 #1 boiler is fitted upstairs cupboard radiaters first floor heat up ok ground floor rads cold this is strange when I run a bath the pressure in boiler drops and I need to top up never came across this before
boiler is fitted upstairs cupboard radiaters first floor heat up ok ground floor rads cold this is strange when I run a bath the pressure in boiler drops and I need to top up never came across this before
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,702 Solutions 1 Nov 10, 2018 #2 Sounds like time for a new boiler
T tinbasher Messages 14 Nov 10, 2018 #3 ShaunCorbs said: Sounds like time for a new boiler Click to expand... money tight just now had an engineer look at today he was not to sure what was wrong?
ShaunCorbs said: Sounds like time for a new boiler Click to expand... money tight just now had an engineer look at today he was not to sure what was wrong?
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,702 Solutions 1 Nov 10, 2018 #4 Sorry to say if he can't work it out from your description he should go back to do some training
AMGasServices Gas Engineer Messages 686 Nov 10, 2018 #5 Cheap boiler expensive part not worth spending money on. Try getting a one off repair from a big provider if things are tight.
Cheap boiler expensive part not worth spending money on. Try getting a one off repair from a big provider if things are tight.
martin54 Messages 7 Nov 10, 2018 #6 The part you need in about 300 quid ,and unless you fit another part to the cold water feed to the boiler it could happen again ..New boiler.
The part you need in about 300 quid ,and unless you fit another part to the cold water feed to the boiler it could happen again ..New boiler.
T tinbasher Messages 14 Nov 10, 2018 #7 martin54 said: The part you need in about 300 quid ,and unless you fit another part to the cold water feed to the boiler it could happen again ..New boiler. Click to expand... what part do you think it is
martin54 said: The part you need in about 300 quid ,and unless you fit another part to the cold water feed to the boiler it could happen again ..New boiler. Click to expand... what part do you think it is
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,702 Solutions 1 Nov 10, 2018 #8 Sorry can't say due to gas safety rules
T tinbasher Messages 14 Nov 10, 2018 #9 ShaunCorbs said: Sorry can't say due to gas safety rules Click to expand... I am a heating engineer pipefitter would not and do not take casings off combi boilers never have and never will I work on industrial boilers
ShaunCorbs said: Sorry can't say due to gas safety rules Click to expand... I am a heating engineer pipefitter would not and do not take casings off combi boilers never have and never will I work on industrial boilers
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,702 Solutions 1 Nov 10, 2018 #10 tinbasher said: I am a heating engineer pipefitter would not and do not take casings off combi boilers never have and never will I work on industrial boilers Click to expand... No but as it's an open forum someone could
tinbasher said: I am a heating engineer pipefitter would not and do not take casings off combi boilers never have and never will I work on industrial boilers Click to expand... No but as it's an open forum someone could
T tinbasher Messages 14 Nov 10, 2018 #11 ShaunCorbs said: No but as it's an open forum someone could Click to expand... sorry that's right I have got an idea whats wrong thanks
ShaunCorbs said: No but as it's an open forum someone could Click to expand... sorry that's right I have got an idea whats wrong thanks