J
jy965497
Any suggestions please:
After a short period of operation, burner switches off and boiler appears to lock-out on both CH and HW only setting. Flue diagnostic LED illuminates and status LED flashes. And then seems to auto-reset, start up, operate for 30 secs, then repeat - 10 secs off, 30 secs on. Result is alternating hot / cold through shower and taps. Burner does not modulate to maintain constant heat. Temperature rising too quickly?
Have replaced diaphragm, thermistor, 3 port valve, all last year, air pressure switch, flue (corroded), and PCB this year as well as a basic service, cleaned venturi and inspected fan.
Thanks
After a short period of operation, burner switches off and boiler appears to lock-out on both CH and HW only setting. Flue diagnostic LED illuminates and status LED flashes. And then seems to auto-reset, start up, operate for 30 secs, then repeat - 10 secs off, 30 secs on. Result is alternating hot / cold through shower and taps. Burner does not modulate to maintain constant heat. Temperature rising too quickly?
Have replaced diaphragm, thermistor, 3 port valve, all last year, air pressure switch, flue (corroded), and PCB this year as well as a basic service, cleaned venturi and inspected fan.
Thanks