Vokera Linea 24 | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Vokera Linea 24 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
M

mcuk

Every few weeks my boiler stops working with a 04 Error Code.
Checking the manual states that this is a Ignition Failure and to check the pressure.

The pressure on the boiler is always okay between 1 and 1.5

This started happening a few months ago after a service

If I reset the boiler it starts to work again. Sometimes I have to turn it off at the mains for a few mins.

The boiler was serviced at the end of Nov 2009 and in Dec 2008 I had a problem with a switch jamming and the Gas Enginner fixed this by changing all the parts in the Vokera Linea Service Kit and also replaced the Diverter Valve as it was making a funny noise and was on its way out.

Does anyone have any advice on what could be causing this latest problem?

I phoned the engineer who carried out the service as the issue started a few weeks later but he said all he did was clean the system and this would not cause this problem.
 
Status
Not open for further replies.

Similar plumbing topics

This response doesn't make any sense, as the...
Replies
23
Views
2K
The housing association I work for only get...
Replies
4
Views
1K
A
Hi, I have Worcester combi boiler which has...
Replies
0
Views
523
Andy Jackson
A
M
Isolate and drain boiler. Pump up expansion...
Replies
1
Views
801
Unfortunately the fitting of a new Venturi did...
Replies
3
Views
610
Back
Top