Vokera Linea 28 not firing | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Vokera Linea 28 not firing in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
G

gsirrell

Hi folks - I am hoping you can help me out here.

I have no expreience of working with gas/electricity therefore I am looking for some pointers if possible.

We bought our house about 5 years ago and it has a Vokera Linea 28 bolier in it. It has been working perfectly fine up until 6 weeks ago when it randomly switches off throughout the day. It switches off and flashes an error code "01" - we need to reset it to allow the heating to come back on. The pressure bar is sitting between 1 and 2. This is happening 5 times a day.

Any ideas on what I can do to resolve this?

Many thanks in advance for your help/support.
 
Hi folks - I am hoping you can help me out here.

I have no expreience of working with gas/electricity therefore I am looking for some pointers if possible.

We bought our house about 5 years ago and it has a Vokera Linea 28 bolier in it. It has been working perfectly fine up until 6 weeks ago when it randomly switches off throughout the day. It switches off and flashes an error code "01" - we need to reset it to allow the heating to come back on. The pressure bar is sitting between 1 and 2. This is happening 5 times a day.

Any ideas on what I can do to resolve this?

Many thanks in advance for your help/support.

01 means boiler failing to light in the required time,thus going to lock out,could be ignition,sticking gas valve ,+
You will have to get a Gas safe heating engineer in sort out
 
Thanks puddle

I'll give an engineer a call - wasn't sure if there was anything I could do?
 
Status
Not open for further replies.

Similar plumbing topics

Easy done when you start bud, post around 10...
Replies
8
Views
2K
A
TRVs open? Any other valves been touched?
Replies
7
Views
3K
Hi It seems like i have exatly same problem -...
Replies
2
Views
1K
S
  • Question
There were issues with failing heat exchangers...
Replies
3
Views
1K
Back
Top