Vokera Maxin24e ignition control board

[bennythedip]

Just looking for a bit of advice on the Vokera Maxin24e. When the hot water was running for a while the boiler goes to lockout and needs reset before it will run again for another while. I had an ignition control board from one which I had taken out and stuck that in but the same thing has started happening again. Do I just get a brand new board or is there anything else that could be causing it? Thanks for any help.

 

[Ermintrude]

Hex is scaled up. Remove Thermister and bob will be related to your mother. Well it will prove that the issue if with hex.