Vokera Mynute 14se AAV access | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Vokera Mynute 14se AAV access in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
2
Is anyone familiar with this boiler?

The auto air vent is leaking but is in an extremely awkward place and my plumber nor I can figure out how one gets access to be able to change it. The side panel is welded so not removable and it looks like the only way to access it would be from the rear of the boiler (i.e. remove the boiler to do it!) which seems crazy.

Any ideas would be very much appreciated
 
Happy to do that if it's possible on this model, certainly not something I'm looking to do myself. But is it actually doable? He showed me what he meant and it did look incredibly tight back there
 
Either way I’m sorry to say you are going to need to be gas safe and to be fair their are boilers out there that due to poor design have to come off the wall for certain repairs. You will need to bite the bullet or see if you can get a vokera engineer
 
Status
Not open for further replies.

Similar plumbing topics

Hi, never heard from the customer again so...
Replies
20
Views
7K
  • Locked
Hi We suggest you get a qualified plumber in...
Replies
2
Views
2K
Basically sounds like nothing was set in stone...
Replies
21
Views
6K
Working at a flow temp of 30 ? As a dt of 30...
Replies
6
Views
5K
D
  • Locked
Thanks rpm and brum. Got it sorted. Turns out...
Replies
3
Views
866
duffbot
D
Back
Top