Vokera syntesi 25e fault code 04 | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Vokera syntesi 25e fault code 04 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Nas

Plumbers Arms member
Plumber
Gas Engineer
Messages
133
Has anyone any experience of these boilers. Is there a common failure for the fault code 04 (insufficent water pressure). The boiler was pressurised yesterday and worked fine all day. The went off showing code 04. There are no leaks to cause the loss in pressure.
 
Expansion vessel requires recharging,or blocked tube to exp v.
 
I pressed the schrader valve before re-charging a few tiny speck of water came out. Is the expansion vessel knackered? when switched on, pressure on the boiler slowly rises to over 3 bar until the prv discharges.
 
Status
Not open for further replies.

Similar plumbing topics

Morco feb 24ed3 has a f1 fault code. The...
Replies
0
Views
843
This response doesn't make any sense, as the...
Replies
23
Views
2K
Phone your gas safe registered engineer.
Replies
1
Views
803
Probably a pressure sensor still involved but...
Replies
3
Views
1K
  • Locked
  • Question
Anyone know of a repair service for Axpert...
Replies
0
Views
298
Back
Top