wall fed shower head change to 1/2 bs fitting | Showers and Wetrooms Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss wall fed shower head change to 1/2 bs fitting in the Showers and Wetrooms Advice area at Plumbers Forums

Messages
3
we have mira excel bir shower and the shower head is not looking good all the chrome is coming of and we want to replace it. we canot get a replacement as they do not sell the logic bir head anymore it is only available with the full shower?
we had bought a difrent shower head but when fitting the original is a pushfit conection and has the 15mm pipe coming out of the wall with a compresipn fitting on, all the shower heads we have seen are 1/2inch male and screw into a female adapter in the wall. Is there anything i can do without smashing the tiles to fit the female adapter.
 

Similar plumbing topics

S
  • Question
No photo shown. It is usual to apply ptfe tape...
Replies
1
Views
246
  • Question
Just as an aside, this fitting is never under...
Replies
7
Views
1K
  • Question
i once had a customer who asked for it to be...
Replies
2
Views
2K
  • Question
Chrome 1/2” Male/Female irons should do the job?
Replies
7
Views
4K
  • Question
Shower engineer, yes, that looks ideal...
Replies
7
Views
3K
Back
Top