A few years ago I installed a wall hung toilet pan in my last house which did not flush well when disposing of waste solids.
The water would rise up to the rim then dissipate and usually required further flushing to complete the disposal.
I don't recall the brand but the wall mounting frame was Geberit.
The previous conventional installation worked fine
I concluded that the throat was too narrow compared to the original pan and this restricted the flow, it may have been designed like this to reduce the ground clearance
Is this a common problem with these wall hanging pans?
The reason I ask is that I have recently moved house and I am considering fitting another one, if I can be advised on one
which will work as intended.
The water would rise up to the rim then dissipate and usually required further flushing to complete the disposal.
I don't recall the brand but the wall mounting frame was Geberit.
The previous conventional installation worked fine
I concluded that the throat was too narrow compared to the original pan and this restricted the flow, it may have been designed like this to reduce the ground clearance
Is this a common problem with these wall hanging pans?
The reason I ask is that I have recently moved house and I am considering fitting another one, if I can be advised on one
which will work as intended.