Wall mounted toilet problem with offset soil pipe.

[DaveTaylor1174]

Hi guys, I've had a search and couldn't find anything related.

Installing a wall mounted toilet, unfortunately didn't know this when I put the soil pipe in position. The supplied fitting is now approximately 130mm offset from the vertical connection. Any ideas? (amateur obviously!) Wondered if two solvent weld 90s would be tight enough? But wanted advice before I fork out £40 for the pleasure. Limited height to fit in the photographed connector that I will already need to cut down.

Many thanks,
Dave.

 

[ShaunCorbs]

Can’t you get a straight one (the spigot) then a 90 on the end of that etc

 

[DaveTaylor1174]

Can’t you get a straight one (the spigot) then a 90 on the end of that etc

Thanks Shaun, stupidly I didn't think of changing the connector! Just not sure what type to look for as the current 90 has a channel in it that locks in place with a ratchet bracket. I'd need a similar one. I've emailed RAK now but not sure how much helo they'll be.

 

[ShaunCorbs]

You would need one from rak or similar eg geberit

 

[DaveTaylor1174]

You would need one from rak or similar eg geberit

Thanks for your help.