want to fit tmv2 but supples to basin taps not balanced pressures

[drainrod]

have gravity hot, mains cold to basin taps,require to fit a tmv2
anything i can fit to avoid trying to get gravity cold to taps to balance

 

[SimonG]

Could try a pressure reducing valve on the cold feed to the tmv.

 

[drainrod]

Could try a pressure reducing valve on the cold feed to the tmv.

yes ,was looking at wondervalve

 

[SimonG]

Whichever valve you use, use one with a pressure gauge on it to help set it up.

 

[Danb]

Simong said it all mate ,
Make sure you get one that can adjust down to a low pressure,
Youll find they have different min and max pressure adjustment
[automerge]1572538160[/automerge]
Also you know you can adjust the head on the tmv to open close the hot.

 

[Eddie Morris]

The Altecnic 5213 merchant mixing valve is approved to low pressure and can have a pressure ratio of 5:1 and I think the min is 0.5bar

 

[townfanjon]

yes ,was looking at wondervalve

Wondervalves are good but they limit pressure not flow
[automerge]1573126783[/automerge]

Wondervalves are good but they limit pressure not flow

What a ******* , start again , they limit FLOW not PRESSURE.