Wanted: domestic heating design guide book | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Wanted: domestic heating design guide book in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

TerryWaite

Plumbers Arms member
Plumber
Gas Engineer
Messages
324
After the above book, see picture

ImageUploadedByTapatalk1358002756.295748.jpg
 
Can't see the pic on my phone. Is it not the one from ciphe? Silver cover i think.
 
I've got that book but it's dated March 2002, the cover is exactly the same except the logos are the older versions - for example, mine has a Corgi logo instead of Gas Safe. Wonder if much content has been changed?

Edit: Gas Safe logo? Duh, I meant the Corgi logo is the old one. I'm tired.
 
Last edited:
Must have been a troublesome stool this morning if you read upto and including the classifieds tam.....
3
Well it is a long story Kevan. Got up to a dog shyt in the kitchen so after throwing the dog out i woke the mrs because that is her dept and I don't do shyt for less than 40 quid/hr.
She starts the moaning & complaining and i'm thinking fk this i'm going to the small room for a bit peace just as the postie delivered the mail.
Picked up the PHAM news on ther way past and stayed there reading it cover to cover until my legs were numb and she shouted that my Saturday fry up was ready :smile:
She still loves me and the dog is getting shot if it keeps that up :smile:

:
 
I've got that book but it's dated March 2002, the cover is exactly the same except the logos are the older versions - for example, mine has a Corgi logo instead of Gas Safe. Wonder if much content has been changed?

Edit: Gas Safe logo? Duh, I meant the Corgi logo is the old one. I'm tired.
As far as I know the 2007 (2nd) is the current addition, although think some one said on here there was a newer one would be interested if any finds a 3rd edition.
Yes there where lots of changes between the 1st & 2nd, all the heatloss section was re done (21C all rooms except baths 22C) with all new worksheets & the ventilation was updated in line with Part F changes & some of the design layouts updated including U/F I think.
 
I've got this book. Came as part of the oil course I did last year.

Have had a quick flick through it. Seems pretty in depth. How come you are after it?
 
Mines got revised September 2011 on it Chris, but it was also revised in 2010, 2008 and 2007!
 
If you're after it for something in particular, I'll post it up to you, and when you're done with it, just post it back to me. I like to keep a good selection of books myself, you never know when you'll need to look something up!!
 
ahh thanks for the offer Danny, youre a gent, im not Desperate for it I just wanted to make sure I can give cusomers the best possible system for thier requirements, and make sure I am spot on with all my calculations and design specs, I am quite interested in the design side of things, just after broadening my echnical knowledge really rather than just lumping pipe in all day, although I do enjoy throwing pipe in :) Ill probably just order it off corgidirect when I get round to it. Thank you though mate.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
I don't know if you are aware of the "Society...
Replies
8
Views
1K
  • Sticky
I have a weird intermittent problem where my...
Replies
8
Views
2K
Fits back on flue on top of boiler
Replies
3
Views
661
  • Question
Looking at how you replied to ShaunCorb's...
Replies
9
Views
607
Ive got a new replacement boiler to install...
Replies
0
Views
1K
Back
Top