Hi,
Father in law just moved into new house. His heating bill has been estimated by previous occupant(the owner). Based on his gas consumption.
THe landlord has had safety check carried out and passed 2 fires, the warm air and hot water. I told him I'd gas rate them, all is ok except the warm air is rated at 24kw which according to data badge should be 11.6kw. Have a working pressure of 19.5mbar at meter, 17mbar at gas valve and burner pressure of 15mbar which is 0.5 under what it says on data badge.
It's there about correct, although maybe a bit low on gas inlet working pressure.
Any ideas what the problem could be?
Thanks
Father in law just moved into new house. His heating bill has been estimated by previous occupant(the owner). Based on his gas consumption.
THe landlord has had safety check carried out and passed 2 fires, the warm air and hot water. I told him I'd gas rate them, all is ok except the warm air is rated at 24kw which according to data badge should be 11.6kw. Have a working pressure of 19.5mbar at meter, 17mbar at gas valve and burner pressure of 15mbar which is 0.5 under what it says on data badge.
It's there about correct, although maybe a bit low on gas inlet working pressure.
Any ideas what the problem could be?
Thanks