H
hussy
Hi y'all.
( I like the choice of smilies)
I need to drain down my CH system, it is full of sludge, and I wish to fit on new wheelhead/lockshield valves to 4 rads downstairs and 3 TRV valves to 3 rads in the bedrooms.
I was intending to flush out the system, remove rads and hose then attach everything and flush with cleaner, rinse and then inhibitor.
Problem - there is no drain cock/valve anywhere. Checked boiler house, rad valves etc.
There is a vent pipe in loft with cold water tank and F&E header tank so I presumed a conventional open vented system.
My boiler is this type WARMFLOW CENTRAL HEATING OIL BOILER & RIELLO BURNER - Castlereagh - Belfast - Heating, Fire Places, & Fire Surrounds for Sale - 55541394
I think it is system pressure boiler but there is no pressure dial to read. I have no ideas now how to drain down the system and cautious about the refill.
Anyone got ideas??
That title is a bit long and overdue........
what I meant was
Warmflow oil burner with riello Burner.
I have no drain valve/cock is the main issue.
I have no drain valve/cock on my CH. What do I do? Is it ok to drain off from a rad valve on ground level, then install a drain valve (by the way is there a better valve to install for easier drain down)
should all central heating systems include a drain valve/cock, no matter if system is open vented or sealed?
boo
Last edited by a moderator: