C
Colin973
I would be grateful if anyone could help advise/clear up thefollowing situation for me. I recently (May2016) had a new Combi Boiler (Vaillant Ecotec 835) fitted to my 3 bed 1.5bathroom house that has 8 radiators and no other gas appliances by 2 gasengineers who work for a very large (over 130 plumbers) and well known heatingcontractor in the South East, I should add the work was done on a private basisand not through the well known company.. Over the last 2 months the bar pressure has dropped 3 times where theboiler has cut out, I was unable to contact the 2 gas engineers and assumed thiswas a fault with the boiler so had a Vaillant engineer out to check theproblem. On his inspection he has foundthat there was maybe 1 or 2 very slow leaks on 2 radiators and that the boilerhas a ‘low inlet working pressure of 10mb’. He also found that a new gas pipe of 22mm was NOT installed from themeter to the boiler, it is was just connected to the old pipe at floor level toall of which he has issued me a warning notice and turned my gas off. Can anyone advise how serious this is and whetherthe 22mm pipe needs to be installed or not as this is all under the newfloor/kitchen I had installed? I havetried to contact the 2 gas engineers who installed my boiler without any successand have just noticed that the gas certificate they have given me wassigned/completed by an engineer/different company (Corgi Registered) that isneither of them and this 3[SUP]rd[/SUP] engineer who has completed thecertificate was never at my property and yet he has stated my boiler has 22mbon the commissioning paperwork. Havethey broken some regulations here, besides not installing the 22mm pipe, theyhave fraudulently completed the certificate, will informing Corgi do anygood? Thanks in advance for your help.