Washing machine connection advice

[riemann1]

Hi all. We are trying to install a new washing machine in our home. The previous owners had a slot for a washing machine. We noticed that there is only one hose in the wall. I would have expected an inlet for fresh water and an outlet to drain away dirty water. Image attached. How do we use this one hose to connect the machine? Please advise. Thanks.

 

[ShaunCorbs]

whats in the right cupboard? (pic would be handy)

 

[riemann1]

whats in the right cupboard? (pic would be handy)

More pics added showing ither side of the washing machine slot.

 

[ShaunCorbs]

hole bottom right in the back does the plinth come out easily or whats the next until along (right)

also them electrics need sorting (loose face plate)

 

[riemann1]

hole bottom right in the back does the plinth come out easily or whats the next until along (right)

also them electrics need sorting (loose face plate)

both plints are screwed on tight to the base. I put my hand into the hole as far as i could but couldn't feel a pipe or anything else.

 

[ShaunCorbs]

both plints are screwed on tight to the base. I put my hand into the hole as far as i could but couldn't feel a pipe or anything else.

ok whats in the next unit to the right?

 

[riemann1]

ok whats in the next unit to the right?

A tumble drier on one side and 3 shelves for cutlery on the other.

 

[rpm]

both plints are screwed on tight to the base. I put my hand into the hole as far as i could but couldn't feel a pipe or anything else.

Remove plinths, shine torch and take photo if anything found.

 

[ShaunCorbs]

View attachment 40592View attachment 40591View attachment 40592
A tumble drier on one side and 3 shelves for cutlery on the other.

the next one over to the right eg 2nd one to the right sink unit?

 

[OffshoreGas]

Quite often pipes will come from under your sink. They may have removed the hoses with the old machine.

While your installing your washer that cable wrapped in tape and smashed socket look pretty suspect. An easy fix while you have access.