Waste pipe

[slacky]

Hey guys

Just put a dishwasher in and was wondering is there any fitting for the waste pipe? At the minute I've just stuffed it in

 

[Rybo_1]

Go on in to your local merchant and ask for the spigot that would normally come with a double spigot p trap

 

[Rybo_1]

And a jubilee clip whilst your at it!

 

[slacky]

Have you got a link for one from screwfix ?

 

[Ch4 plumbing]

Should have one of these on the trap, minus the blue blanking cap.

Also so you should use a jubilee clip to secure the rubber outlet hose to the spigot.

Word of warning......what you have done so far could possibly pop off when you use the machine and cause a flood!!

 

[Ch4 plumbing]

Jubilee clip

 

[slacky]

Don't worry guys I'm not gonna use it how it is lol

 

[Rybo_1]

Had a quick look through Screwfix and they don't seem to do the spigot for a double appliance trap. Like I said, go in to a plumbers merchants and they should sort you out within seconds.

 

[slacky]

I only need one mate the other one isn't going to be used

 

[Rybo_1]

They have different sizes nuts. Meaning one from a single appliance trap uses a 40mm nut whilst a double uses a 22mm nut (at a guess)

 

[slacky]

It is 22mm I can remember getting the cap for it

 

[JCplumb]

You want one of these is you have a local poofix. There's a Macalpine one there too but it's twice the price.

Telescopic Adaptor Trap 40mm | Traps | NoLinkingToThis

or you may get lucky and one of these will fit your existing bits.

Hose Connector | Traps | NoLinkingToThis