Waste size slightly smaller than inch and 1/4 | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Waste size slightly smaller than inch and 1/4 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
M

mikeyc

Went to an emergency call out today at a hair salon that has a load of foreign basins and traps are all leaking. I need to change them out but my problem is that the waste shank is slightly smaller than inch and 1/4 - like almost fits.

Anyone know any other sizes it could possibly be or suggest where to start looking.

Cheers in advance for any pointers
 
35mm?
 
Went to an emergency call out today at a hair salon that has a load of foreign basins and traps are all leaking. I need to change them out but my problem is that the waste shank is slightly smaller than inch and 1/4 - like almost fits.

Anyone know any other sizes it could possibly be or suggest where to start looking.

Cheers in advance for any pointers

1 1/4 push fit ?
 
No I mean the actual threaded shank on the bottom of the waste is smaller than 32mm so a 32mm trap is too big to screw on. Can't change the wastes as these are a god awful shape, size and design
 
Solvent 1 1/4" is 36mm, push fit is 35mm and Euro size is 32mm.
If it is Euro you will need an adapter like a mcalpine S28
 
As tamz said if it was me i'd swap the wastes out in the sink to standard uk size
 
had quite a number of sink wastes that normal traps wont sit on correctly recently, blumin euro carp.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Hi Did you ever find out what the issue was?
Replies
1
Views
1K
Thanks snowhead/centralheatking/scott_d 👍 much...
Replies
6
Views
2K
  • Locked
All done.
Replies
12
Views
4K
  • Locked
Wrap PTFE around the thread on the waste...
Replies
5
Views
3K
R
  • Locked
Hey all, apologies for the long post: I've...
Replies
0
Views
4K
richardc1983
R
Back
Top