Hi , i have this situation that once every few months the water stops from flowing from the tank to the house. So i go and disconnect the pipe from the 2nd filter and wait for half minute and water start flowing again.
I made a drawing here on the picture to show how is set up.
I was wondering if a vent for letting the air pass so to help with the flow will help but i do not know where i should install it.
The 10 ton tank already have a 32mm hole on top of it, which in my mind should act like a vent ?
I would very much appreciate any help or guidance
I made a drawing here on the picture to show how is set up.
I was wondering if a vent for letting the air pass so to help with the flow will help but i do not know where i should install it.
The 10 ton tank already have a 32mm hole on top of it, which in my mind should act like a vent ?
I would very much appreciate any help or guidance