gingalig
Gas Engineer
- Messages
- 217
Hi and thanks in advance for any help, I went out to a breakdown today the tank had a fair bit of water in it when dipped with paste it indicated it to be close to the outlet but not above it, I bled the pump and what came out was pretty grim very contaminated with water approx 70mm,
( the owner had just had a 1000 lts of oil delivered,) I managed to drain about half a gallon out of the tank via the outlet and it flowed clean, ( no filter etc on the tank) cleaned the filter in the pump changed the nozzle because it was badly contaminated and bled through, getting the boiler up and running again. ( not sure for how long with the water issue ) My question is, and please excuse my ignorance whats the best way to remove the water from the tank and how should I dispose of it, I do have a waste disposal liscence but not really sure it covers me for transport of what could be a fair bit of contaminated oil, the tank is 2m round and 1.5m tall, single skin so pretty big. I have advised it needs changing as its not bunded and also fails the fire risk element of the T 1133D by a whole host of issues.
( the owner had just had a 1000 lts of oil delivered,) I managed to drain about half a gallon out of the tank via the outlet and it flowed clean, ( no filter etc on the tank) cleaned the filter in the pump changed the nozzle because it was badly contaminated and bled through, getting the boiler up and running again. ( not sure for how long with the water issue ) My question is, and please excuse my ignorance whats the best way to remove the water from the tank and how should I dispose of it, I do have a waste disposal liscence but not really sure it covers me for transport of what could be a fair bit of contaminated oil, the tank is 2m round and 1.5m tall, single skin so pretty big. I have advised it needs changing as its not bunded and also fails the fire risk element of the T 1133D by a whole host of issues.