Water Pressure In..Washing Machine

[Sparky1972]

The water in to my washing machine is via a tee off the cold water mains via 1/2" PEX pipe (2metres) and then the washing machine hose connected. The water pressure into the machine seems very low. The water pressure on the kitchen tap is really strong. Why would this be, I would expect it should be the same.
It is causing an alarm on my washing machine re. low water pressure in. Any ideas/suggestions

 

[Aquarius]

The tee, is it an appliance/washing machine tee? If so, could be a stuck ball. Try disconnecting the hose from machine and test into a bucket, or something similar. If that’s poor, then it’s before the machine obviously. If that’s strong then could be the hose is kinked when pushing it back, or blocked filter.

 

[John.g]

Washing machine hoses sometimes have filters on both ends.