Water supply to outhouse | Bathroom Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Water supply to outhouse in the Bathroom Advice area at Plumbers Forums

Messages
13
Hi, im after some advice on how to supply water to a washing machine in our out house. There is a outside tap near by can I T off that or do I need to come off the mains supply with mdpe and use a stopcock where it enters the outhouse etc.
Any help is appreciated
 
The grey insulation is good, but not suitable for outside as UV rays will damage it.
If you have it ducted, it would be fine.
I would say the professional way is to have a new pipe ducted underground from your house, but often difficult.
 
Dare I play devils advocate and ask where the waste of the washing machine is running to
Ive put a bottle gully in just outside of the outhouse connected to the main drain running to the manhole

IMG_20180127_122012.jpg
 
Can I bury the pipes as it would be a shorter route to cut across a pathway at the side of the house rather than going all the way around the walls?
Thanks

In That case I would be using 20mm MDPE blue pipe, it is less than £30 for a 25m coil. And no less than 750mm below ground level to avoid freezing!
 
Last edited:

Similar plumbing topics

  • Question
take iso valves off and fit 1/2 inch x 22mm...
Replies
5
Views
767
  • Question
I think 2.7LPM is the minimum requireed so...
Replies
4
Views
274
  • Question
Thank you Shaun. Where would we have a gate...
Replies
2
Views
343
A
  • Question
Thanks for your reply - softener is brand new...
Replies
4
Views
1K
Azonic
A
  • Question
When speedfit came out they one made that type...
Replies
22
Views
1K
Back
Top