Water Tank Corrosion | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Water Tank Corrosion in the Bathroom Advice area at Plumbers Forums

G

Gosportdave

Hi
Can anyone advise how to remove the corrosion on the temperature and relief valve on the outside of my tank.
There is a very slight drip occasionally but not much.

I have attached a photo.
Thanks 20170717_180736.jpg 20170717_180745.jpg
 
A dripping T & P valves indicates a potential problem. This is an essential safety device that should be looked at by a G3 certified plumber. Cleaning it will possibly make any leak worse. It needs testing, reinstalling or replacing if necessary.
 

Similar plumbing topics

  • Question
No
Replies
9
Views
729
PH is 7.5. Chloride is 194. The last water...
Replies
2
Views
691
  • Question
What type of cylinder do you have?
Replies
6
Views
999
Just unscrew the plastic pushfit elbow and...
Replies
3
Views
1K
  • Question
Depends how stack is vented, could be blocked...
Replies
3
Views
987
Back
Top