Waterfall tap problems

[KingDoey]

Evening.

I am in the process of fitting a new bathroom at mine. I have a waterfall mixer tap. See pic. At first it was fine but after ten mins the tap started spraying out at the side of the mesh on the outlet. It seems the mesh is not seated properly. Pushing it back in seems to remedy the problem but a few mins later it drops out of place again. Manufacturers instructions are a generic pile of rubbish. Anybody had this before or is it likely to be a duff tap. Cheers

 

[lame plumber]

hope it wasnt supply and fit, new taps required if it does that straightway

 

[KingDoey]

Is there no way to repair. Will be an absolute ballbag to take them out

 

[eagleeye]

Was it something bought from Victorian plumbing ?

 

[oz-plumber]

Manufacturers instructions are a generic pile of rubbish.

Anybody had this before

Polite answer - YES!!!!!

 

[KingDoey]

My bird ordered them from Willesdens Bathrooms online... She reckons shes just fixed it. Forced the mesh right back and it seems to be working alrite now. Will just have to keep an eye on it...

 

[Ch4 plumbing]

Should be 2 allen key bolts under the spout, unscrew and see what's what.