WB 30CDI System Boiler connection to unvented cylinder

[plm]

Can anyone supply me with way to wire the above boiler (with the optional diverter valve fitted) to the cylinder stat and supplied 2 port valve of a Santon unvented cylinder.

Couple of electricians on job baffled that boiler will only go to hot water mode using WB supplied cylinder probe, unfortunately no pocket for stat probe.

any info taken with thanks

PLM

 

[tamz]

Never used one of these but after having a read through the MI's as far as i can gather, the only way to do this would be to fit an additional cylinder stat or pipe stat to control the 2 port or find a way to use the cylinder sensor.
Better ringing WB technical and getting their advice.
If you do it would be nice to hear their comments.