WB junior full service | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss WB junior full service in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,128
I need to give one of these a proper service, it's not had one before and the FGA readings are getting high.
Do I need anything more than
Brush kit
Burner gasket
Electrodes
 
I need to give one of these a proper service, it's not had one before and the FGA readings are getting high.
Do I need anything more than
Brush kit
Burner gasket
Electrodes
Is the the proper Worcester brush kit with he tool that you have?
 
Sorry for the negative post Scott , I wont even go out to them things, they start to leak when they here my van coming lol
 
Did a worcester 24i system today not serviced for 9 years choked up solid with aluminum oxide sump was solid , new electrodes and combustion seal could not have done it without the tool to remove the baffel cleaning brush helped but flushed heat ex through with clean water running sweet as now cheers kop
 
Did a worcester 24i system today not serviced for 9 years choked up solid with aluminum oxide sump was solid , new electrodes and combustion seal could not have done it without the tool to remove the baffel cleaning brush helped but flushed heat ex through with clean water running sweet as now cheers kop
Do you always just flush the heat exchanger with clean water ? I would use boiled water with scale remover. I don’t want to question your works just curious that’s all
 
Do you always just flush the heat exchanger with clean water ? I would use boiled water with scale remover. I don’t want to question your works just curious that’s all

Do you think the addition of scale remover would or does much if you're just flushing with it?
 
Do you think the addition of scale remover would or does much if you're just flushing with it?
As said earlier I don’t want judge on @king of pipes works. I will keep my opinion now for myself. The work he does is very good and he’s very knowledgeable so I know he knows what he is doing.
 
As said earlier I don’t want judge on @king of pipes works. I will keep my opinion now for myself. The work he does is very good and he’s very knowledgeable so I know he knows what he is doing.

Innocent question mate, if you think your method is effective or even superior I'm sure I'm not the only one that would like to know why that is or why we can't openly discuss it like pros.
 
What scale remover
 
Status
Not open for further replies.

Similar plumbing topics

You are probably right, I will see if I can...
Replies
7
Views
881
I've tidied up this thread and banned a user...
Replies
2
Views
743
  • Locked
  • Question
Anyone know of a repair service for Axpert...
Replies
0
Views
298
If you have the right temperature rise for the...
Replies
10
Views
3K
Something as simple as turning the power off...
Replies
12
Views
2K
Back
Top