What Cylinder | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss What Cylinder in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
I

Icbic

Hi All,
First let me apologise for what has been asked before, but I have searched and found some answers which partly answer my question but not completely!
My indirect cylinder is leaking. Became obvious after having the backdoor replaced, which is directly below the airing cupboard. With the pump going, you can clearly see it dripping underneath. All four tank connections do not appear to be leaking. The one to the valve is crusty with that white calcium looking residue but it's not wet !! Tried tank/leak sealer but no difference.
The impression is that a replacement tank is required but just what is a decent make. This is the one thing I cannot find that anyone suggests. A real cheapy isn't what I want.
Any help appreciated.

Cheers,
Chris.
 
Status
Not open for further replies.

Similar plumbing topics

Replies
1
Views
1K
J
  • Question
I cannot see the photo's but from your...
Replies
3
Views
1K
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
1K
Don't think that M.valves will pull in air...
Replies
17
Views
4K
  • Question
To be fair, it depends on how the bathrooms...
Replies
13
Views
2K
Back
Top