what gas analyser do you use | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss what gas analyser do you use in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
kane 455 and 457
 
They all do the same job... & all we all get shafted when when we need a service or calibration!
 
I do wonder if there would be a market for a lower cost FGA that was disposable after a year. £150ish price bracket.
 
ive used telegans ,anton v2s and kane 455 i prefer the anton but they are fragile compared to the kanes the wire breaks on the anton close to the plug both the others have coiled wire supports
im still using the probe from a 12 year old telegan as its more flexible than either of the newer ones
 
ive used telegans ,anton v2s and kane 455 i prefer the anton but they are fragile compared to the kanes the wire breaks on the anton close to the plug both the others have coiled wire supports
im still using the probe from a 12 year old telegan as its more flexible than either of the newer ones

totally agree with the plug on the antons,they are rubbish
 
Is Kane 250 Compact any good?

does the job but it works out cheaper to buy a 455 over 5 years as servicing is around £80 plus vat each year for the 455, the 250 needs new cells every couple of years at £250 plus!!!!!!!!!!!!!
 
Sick of the cost of services on my anton so got a tpi. It's basic but Been reliable and cheap fixed service for 5 Years £77 for 1st 5 Years
 
The old analyser thread. I must save my speal on copy and paste. I like my testo 330 . Bit on the ex poo endive side but you know where the cost went when u use it daily.
 
Status
Not open for further replies.

Similar plumbing topics

BUY A TPI DC710 FLUE GAS ANALYSER AND GET A...
Replies
0
Views
763
It's usually around 20% off a new one ...
Replies
4
Views
2K
Thanks for your response mate. Im not...
Replies
2
Views
768
The date the inspection is let’s say 2 months...
Replies
13
Views
183
Have you cleaned the heat ex?
Replies
10
Views
2K
Back
Top