Hi
Sorry I can't find my original first post which stated the problem I had with a plumber. To update you all he finally admitted fault and came out last week to rectify the pipe work problem.
Im now left with another issue.. Sigh!
He's probably messed up my motorised valve that feeds the hot water which is external fitted as I have a Unvented hot water cylinder and he says that the valve was stuck in the open position which is why I was constantly getting the boiler firing up as it is calling for hot water. He has moved the pin back the closed position and this resolved the issue somewhat.
What I'm getting now is the wireless thermostats on both floors reaching the set temps for eg 18c and the flame icon remains lit all day and does not go off unless I manually turn the stat down by 1 degree. If I leave them at 18c and then check my rads if they are warm or not, they seem to be like warm or even cold as it seems to me that once they originally warmed up to 18c they no longer reheat up to maintain that temp and the stat as I said still shows flame lit and temp at 18c with the boiler firing up every now and then.
This was a issue I never had before.
What's the chances of Both thermostats becoming faulty which are hung on the walls and not something that has ever been tampered with?
Im so confused. Any one know where and what I should be looking at to find the cause.
Thankyou
Sorry I can't find my original first post which stated the problem I had with a plumber. To update you all he finally admitted fault and came out last week to rectify the pipe work problem.
Im now left with another issue.. Sigh!
He's probably messed up my motorised valve that feeds the hot water which is external fitted as I have a Unvented hot water cylinder and he says that the valve was stuck in the open position which is why I was constantly getting the boiler firing up as it is calling for hot water. He has moved the pin back the closed position and this resolved the issue somewhat.
What I'm getting now is the wireless thermostats on both floors reaching the set temps for eg 18c and the flame icon remains lit all day and does not go off unless I manually turn the stat down by 1 degree. If I leave them at 18c and then check my rads if they are warm or not, they seem to be like warm or even cold as it seems to me that once they originally warmed up to 18c they no longer reheat up to maintain that temp and the stat as I said still shows flame lit and temp at 18c with the boiler firing up every now and then.
This was a issue I never had before.
What's the chances of Both thermostats becoming faulty which are hung on the walls and not something that has ever been tampered with?
Im so confused. Any one know where and what I should be looking at to find the cause.
Thankyou