where to buy hepvo valves | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss where to buy hepvo valves in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,168
Am after the above. Anyone know a good place to buy them from? They're expensive in bes and even more expensive with angled adaptor to connect onto bath.
 
Thanks stani. So it looks like I won't get them cheaper than £22 with adapters
 
Not really, quality only comes at a price, and they are good valves. I would also put in the vertical.
 
Ah yes williams, I didn't think they stocked them as I could not see on the brochure
 
Ah yes williams, I didn't think they stocked them as I could not see on the brochure

Hi Mutley. Its always worth asking - only about 1/3 of our stock lines appear in the brochure - I am way to lazy to design and proof read the 200+ pages it would take to get everything in there.

On that particular product, we are a bit cheaper than BES, but not as cheap as that flea-bay link.
 
What sizes are you after, i have got a few kicking about.
 
Also, what would be the best way to install this for a washing machine
There are a dozen ways to do this without a hepvo.
Btw this week i bought my first ever hepvo.
39 years and never needed one but it was for a D2 on an unvented that had no other cost effective way
 
A dozen hey, my problem is there is a bath and washing machine on a really long run of 2inch. Smells coming up when washing machine runs. No where to put durgo valve and I cannot see an anty syphonic washing machine trap. Not cheap are they those hepvo valves
 
A first time for everything and they do what they say. Upgrade her drainage system over a cup of coffee :wink:
 
Yer fkd then :lol:Btw
when the flats were designed the drainage worked perfect and would have been proved to. What has changed apart from peoples perceptions of what they want.
 
Exactly. So all I can try is these hepvo valves. Excited to test them out really. As not had a reason to try em yet
 
Status
Not open for further replies.

Similar plumbing topics

I have tried hard to get similar to the first...
Replies
0
Views
573
  • Question
But they don’t drain the system so can still...
Replies
3
Views
334
T
I know you must be frustrated, but as gmartine...
Replies
4
Views
465
  • Question
Turn the waste fitting 45 so the angled...
Replies
5
Views
911
  • Question
Thank you all for the responses, exactly the...
Replies
4
Views
785
Back
Top