Which Brand of Radiator? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Which Brand of Radiator? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
2
Just wondered if anyone can recommend a decent radiator brand. Just built an extension and need modern radiators. Our plumber has recommended Purmo. Thanks
 
Look around and see what deals are available. Double convector radiators take up less wall space and have a higher heat output. If your'e heading into the world of designer radiators then the choice is almost endless. I would tend to advise spending wisely on the control system i.e decent TRV's and programmer. Your plumber should be able to spec your output requirements and match them fairly closely to your room space.
 
why have radiators never really got any lighter in weight you would think in these days of technology they would have found a lighter cheaper material with good heat emissivity.
 
Look around and see what deals are available. Double convector radiators take up less wall space and have a higher heat output. If your'e heading into the world of designer radiators then the choice is almost endless. I would tend to advise spending wisely on the control system i.e decent TRV's and programmer. Your plumber should be able to spec your output requirements and match them fairly closely to your room space.
Thanks that’s really helpful
 

Similar plumbing topics

Vertical rads can be a bit hit and miss. I...
Replies
6
Views
983
  • Question
Thank you so much for your replies and advice...
Replies
4
Views
598
I've used a decent double check valve, two...
Replies
2
Views
441
  • Question
It’s expansion and contraction do you have the...
Replies
1
Views
562
  • Question
Well done for sorting it. Waggling the trv pin...
Replies
7
Views
1K
Back
Top