which fitting? radiator 15mm pipe to central heating valve

[polyal]

HI!
i am a new member and only a DIY'er
i have had to replace a radiator with a smaller one
i need to extend the outlet of the radiator by 6" using
15mm copper pipe...what fitting do i use to connect
the pipe to the system valve (which has the original radiator fitting connected )
regards

 

[ShaunCorbs]

any pics of the valve you need to go onto

 

[polyal]

any pics of the valve you need to go onto

yes but how do i upload it

 

[ShaunCorbs]

upload a file right of post reply

 

[polyal]

yes but how do i upload it

 

[ShaunCorbs]

best way would be drain down and either adjust the pipework or install a new valve

eg

https://www.NoLinkingToThis/p/drayton-07-05-900sx-white-chrome-angled-lockshield/7877g

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

and use a piece of 15mm chrome pipe between the rad and valve

if you dont want to drain down

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

https://www.NoLinkingToThis/p/compression-adapting-female-coupler-15mm-x/76567

and a piece of 15mm chrome

 

[polyal]

upload a file right of post reply

best way would be drain down and either adjust the pipework or install a new valve

eg

https://www.NoLinkingToThis/p/drayton-07-05-900sx-white-chrome-angled-lockshield/7877g

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

and use a piece of 15mm chrome pipe between the rad and valve

if you dont want to drain down

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

https://www.NoLinkingToThis/p/compression-adapting-female-coupler-15mm-x/76567

and a piece of 15mm chrome

thanks very much will check it out♪♪