Which is the flow in and out on a Magnaclean Professional 2?

[plumbandplumber]

Looking to fit a Magnaclean Pro 2 but the location will be difficult. Which of the two ports on the filter does the flow of water enter, and which is the exit? Or can flow enter and exit either holes?

Also, can the filter be installed on a horizontal pipe, or vertical only? Many thanks.

 

[hammers4spanner]

Take it you never looked at the leaflet that comes with it then .

 

[jonnyswamp]

Fitted a 28mm pro 2 (I think) today and bumf said it was reversible and could be fitted vertical or horizontal
EDIT
The filter has to be vertical, but the pipe work feeding it can be either

 

[plumbandplumber]

Bit difficult seeing as I haven't bought one yet. The point of my question was to avoid buying something that may not fit my layout?

 

[hammers4spanner]

Bit difficult seeing as I haven't bought one yet. Why would I buy something that I'm not sure would fit my layout?

Not sure if you have heard of it but their is something called google

 

[plumbandplumber]

Not sure if you have heard of it but their is something called google

Ok, so you're saying that everything is on Google? So we don't need forums? Just for you, I looked at the info on the Adey site and it didn't say one way or the other.

Have a look for yourself - Let me google that for you

 

[ShaunCorbs]

flow in the bottom and top return (out to the boiler on top) and normally on the return

 

[Atouchofgas]

Here's what a few secs on google found
http://www.adey.com/downloads/literature/MagnaCleanProfessional2_InstServ.pdf

 

[hammers4spanner]

Not difficult is it

 

[hammers4spanner]

Talking of ADEY i phoned them up the other day and said i have lost my magancleanse (which i never) and received a load of new stuff . Really good customer care to be honest .

 

[Atouchofgas]

Not difficult is it

Really difficult, I had to type magnaclean pro 2 into Google

 

[kay-jay]

Ffs guys. Here is how to figure out this incredibly complex issues. ....

Adey do a variety of products all of them have a sticker on the front with a picture showing the flow direction. It's a big spiral with an arrow at one end. Some bottom to top ,some top to bottom.

No need for Google if your braincell count is higher than your shoe size

 

[Atouchofgas]

Aye but the op states he's not bought the product so difficult to see the arrows without seeing the product hence Google

 

[kay-jay]

I'd be surprised if the pipework couldn't be altered to suit anyway

 

[stevetheplumber]

i made the mistake of buying a mini only to find its not reversable and had to loop the pipework to fit it as pipework was rising from the combi and they are made to go below which is the most common

 

[gassafe]

Just fit it any old way