Who does this on a logic + service

[king of pipes]

This one got missed last year so full strip flush through the heat ex new electrodes and gaskets good for another year . Cheers kop

 

[Scott_D]

Every time.
Nice boilers to service

 

[Scott_D]

I have recently added removing the brass injector to clean up
Can make them noisey

 

[ShaunCorbs]

Every 4 years

 

[AMGasServices]

Depends on FGA results and the thickness of the customers wallet.

 

[Scott_D]

I don't think the FGA results are improved by the flush through

It's just that the shale from the alloy Hex will eventually block it up
Same as Worcester when you see how much is in the trap each year.

 

[Harvest Fields]

Every time.
Nice boilers to service

Actually easy once you have done your first 2.

 

[sammathias]

Kop do you change the electrodes every year? And Shaun I'm sure I remembered you saying alloy hex full strip down every year on another thread

 

[Scott_D]

Actually easy once you have done your first 2.

Worth doing the Logic training day to have a practice. It looks impossible until you get the right angle to remove the burner

 

[king of pipes]

Only change them if they need it Sam I do strip them every time flush them through regardless of the FGA results and always check and clean the electrodes, gaskets are not kept as a stock item locally to me so worth keeping a few in the van . Cheers kop

 

[Scott_D]

From Facebook
Must go through the recycling bin

 

[Harvest Fields]

And make sure it is washed out properly.

 

[mutley racers]

Mi,s require full strip every year. Doesn't need a new gasket though if I remember correctly. Only if in bad shape.

Same as the vogue

 

[Scott_D]

Only needs a new gasket if it's damaged

 

[Sharp Point]

Yep, every service on any boiler gets a full strip n clean