A
Ayman B
Hi,
I installed Sime Brava One 30 BF on my 150 Sqare meters home. I also installed an external water pump at the hot water outlet to help the internal pump to push the water 4 floors up (I installed it instead of an old diesel boiler, so I had to use the old infrastructure).
I set the heating temperature to 45 degrees celious. And in just 2 weeks, it burnt almost 140 m^3 of gas. I checked it dozens of times in the past two weeks, and the flame sign was always on and the temperature was stable on 45. It seems like it is burning gas contantly, and not heating up the water to the desired temp, wait until the temp drops a bit, then heat it again, which is the behavior I see on my friends boilers.
What could be wrong? Could the external pump be the cause for this behavior?
I installed Sime Brava One 30 BF on my 150 Sqare meters home. I also installed an external water pump at the hot water outlet to help the internal pump to push the water 4 floors up (I installed it instead of an old diesel boiler, so I had to use the old infrastructure).
I set the heating temperature to 45 degrees celious. And in just 2 weeks, it burnt almost 140 m^3 of gas. I checked it dozens of times in the past two weeks, and the flame sign was always on and the temperature was stable on 45. It seems like it is burning gas contantly, and not heating up the water to the desired temp, wait until the temp drops a bit, then heat it again, which is the behavior I see on my friends boilers.
What could be wrong? Could the external pump be the cause for this behavior?