Will a 22mm pipe cutter work on older 3/4"?

[bilabonic]

Hi All

Pretty explanatory really, need to cut some old 3/4" pipe feeding H+C bath taps, access is very tight.

Will my 22mm cutter work on 3/4", if not what can i use?

Thanks

 

[Chuck]

Will my 22mm cutter work on 3/4", if not what can i use?

Shouldn't be a problem if you can get access. The OD of 22mm tube is 22.00 mm. The OD of 3/4" copper pipe is normally 21.49 mm.

 

[Aquarius]

Iirc it fits, but is quite tight and hard to initially move

 

[Ric2013]

My Monument Autocut ones work okay. I have the metal bodied ones that initially go on easily and seem to only bite the tube once you start to rotate them. The plastic version is nowhere near as good as it does not do this.

 

[bilabonic]

My 15mm is a Roth and 22mm a Monument, never had any luck with the plastic ones tbh.