Will shower pressure be less if switch to an unvented HW cylinder? | Showers and Wetrooms Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Will shower pressure be less if switch to an unvented HW cylinder? in the Showers and Wetrooms Advice area at Plumbers Forums

R

ridgerunner

Hi, am getting our bathroom updated and local company suggested ditching our traditional attic CW tank/vented cylinder and pump for the shower and install an unvented pressurised HW cylinder instead. We have been told that this will not lead to a drop in effective pressure from the shower. Is this correct? The power shower gives a great output and we do not want to lose any performance.
Our mains water pressure is high as we have fitted isolation valves to the CW taps, partially shut, to stop water blasting out of the sink. We have a WORCESTER 18i traditional boiler. Small 35 year old detached bungalow with one bathroom.
david
 
I recently replaced my attic tank and vented cylinder with an unvented pressurised cylinder (after checking that my mains pressure was high enough) and it made an enormous difference! You should not get a drop in effective pressure and more likely to get an increase as you are no longer dependent on gravity/ height potential.
 
Upvote 0
If you only had a gravity fed shower then yes, of course, almost any mains pressure/unvented cylinder will give a increased shower flowrate but the OP has a pumped shower, dont know what pressure/head pump is being used but could be anything up to 3bar at the shower so its important that a static/dynamic test is carried out on the mains supply as the pressure at the shower might only end up at 1.5/2bar which, while quite adequate, may not meet his/her expectations?
 
Upvote 0
I recently replaced my attic tank and vented cylinder with an unvented pressurised cylinder (after checking that my mains pressure was high enough) and it made an enormous difference! You should not get a drop in effective pressure and more likely to get an increase as you are no longer dependent on gravity/ height potential.
More likely get a drop in performance.
 
Upvote 0

Similar plumbing topics

  • Question
This is a follow up posting. Now have the...
Replies
6
Views
1K
S
  • Question
Many thanks, Ben-gee - that's very useful...
Replies
2
Views
780
Steveo111
S
B
  • Question
Your plumber was correct, the mixer-tap idea...
Replies
1
Views
724
  • Question
Unfortunately that would be me :) . My first...
Replies
2
Views
699
  • Question
Ya, they said the fact the anti-vibration...
Replies
6
Views
621
Back
Top