Wilo Gold 50 Pump Replacement Advice | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Wilo Gold 50 Pump Replacement Advice in the UK Plumbers Forums area at Plumbers Forums

Messages
2
Hi all
I currently have a Wilo Gold 50 Central Heating Pump that after 20 years is now very noisy (no air in it) and is generally on its way out so I'm looking to replace it.
I've been looking around for alternatives that are a lot more energy efficient and being the cheap skate I am 😏, not going to break the bank so under £75.
Looking for a new pump and not used/refurbished etc...
Obviously a bit of a minefield but I've narrowed it down to these three so far so wondered if anyone had any experience of these pumps or could advise on which may be the better? Is there any functionality, safety features or similar that possibly makes one better than another, albeit I think they may be much of a much-ness?
I'm also presuming these would all work as a direct replacement to the existing Wilo as they're all "25/60 130" with the same thread size?

CURA-GPA-25-6-II (Max input power of 45W) - circa £54 with p&p

DAB EVOSTA 3 (Max input power of 35W) - £72

SMITHS ES2 25/60-130 (Max input power of 42W) - £70

Any help appreciated.

Thanks
 

Similar plumbing topics

  • Question
Yep that ones ok as well
Replies
3
Views
3K
  • Question
Hmm DAB is a Grundfos company......
Replies
14
Views
7K
Jojomacjo
J
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
H
Hi there, thanks for your time to look at this...
Replies
0
Views
909
HRP123
H
The old Wilo pump lasted 15 years if it wasn’t...
Replies
12
Views
11K
Back
Top