Wireless programmable room stat | Plumbing Jobs | The Job-board | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Wireless programmable room stat in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
F

FlyFifer

Looking for above that can be used without need to have mounted on a wall bracket ie: free standing & totally mobile for use by a partially disabled customer. Wants ability to set own times, settings, set back temps & override from his bed overnight & be able to take handset with him when in wheelchair & moving from room to room. Is able to change batteries when required & to sit device on a suitable surface away from direct heat once set etc. Any advice appreciated. Boiler is a Vokera Mynute HE & existing heating clock to be retained for timed hot water.
 
Cheers guys, will pass info on to our heating install guys for consideration.
 
A slightly sideways suggestion - rather than saddle your customer with something to carry round, I am guessing that they probably carry a smartphone already?

In which case, why not look at the IT500?

They could control the heating from an app on their mobile phone. It got a reasonably positive review from Bod here.
 
Last edited by a moderator:
Can the honeywell 927 allow for setting various target temps throughout the day?
I.e. during night 16deg 11PM > 6AM then 21deg 6AM>11?

As my current ideal wireless stat only allows for 1 set point temperature for the full day yet it can have various boiler on/off times - So not as flexible as I would like.

Thanks
 
Status
Not open for further replies.

Similar plumbing topics

So I've used a wireless thermostat to activate...
Replies
0
Views
2K
Neil, There are two main ways of controlling...
Replies
19
Views
8K
D
Sounds like you need somebody competent to...
Replies
2
Views
1K
Murdoch
M
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
Back
Top