- Messages
- 2,718
Went to a job today reporting of no heating. Heating only boiler with a cylinder for dhw - s plan.
After creating demand on the water, confirmed the pump and boiler was fine.
After testing I found the wireless receiver to be at fault - I bridged the common to the call and ran the heating, all is fine.
But ... how do you test a wireless room stat to see if it's faulty?
It was a Drayton Digistat RF1.
After creating demand on the water, confirmed the pump and boiler was fine.
After testing I found the wireless receiver to be at fault - I bridged the common to the call and ran the heating, all is fine.
But ... how do you test a wireless room stat to see if it's faulty?
It was a Drayton Digistat RF1.