WOLF boilers | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss WOLF boilers in the Boilers area at Plumbers Forums

Status
Not open for further replies.

Millsy 82

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,350
Went out to my first ever WOLF boiler today never even heard about them, anybody else worked on these had problems with them they seem well made and a bit puzzling at first but got there in the end with the help of mi's
 
If you take the burner out you'll need new seals[service kit] pulsar direct stock parts.£50plus !!!!
Had a noisey boiler, contacted Wolf in Germany, they were brilliant sent me a pdf & diagram of modifications [drilling a hole in airtube].
 
They sent me a manual for the service and I noticed you need quite a few seals and bits. I did notice the parts were quite pricey might just be the boiler I looked at as it was light commercial.
 
Never even heard of these before, but £50 for seals to do a service seems a bit on the rich side.
 
That is retail though, the trade can get it alot cheaper and not through pulsar my local supplier got a price on a pump almost 50% off. If you looked for a vaillant graphite gasket next time you go to get 1 from pts or parts retail is an enormous amount compared to what you get it at
 
The college where I took my level3/ACS had a wolf combi. I thought it was awesome.


Sent from my iPad using Tapatalk HD
 
Aye lol.

All the lads used to clamber round to work on it cos it was dead easy to strip

It's the first and only wolf I've seen.

Your right it was quite simple to strip down, I think I stripped it a couple of times. Definitely easier than a Worcester.

I'm pretty sure it's still knocking about.
 
wolf is now sold by Ubbink uk, a sister company of wolf. The service kit is £25. the prices of the boilers and spares has dropped since pulsar direct lost the supply of these boilers.
[DLMURL="http://www.ubbink.co.uk/index.asp?view=static&menu=122&path=%7C33%7C84%7C122%7C"]Ubbink | UK support for Wolf Boilers and Solar Thermal[/DLMURL]
 
Last edited by a moderator:
just had a look on their website - some of their advertising guff shows the heat exchanger swinging out for easier cleaning. first time I've come across that idea! depending on how this function's engineered though - could this be trouble? anyone had the heat exchanger out on one of these? nice to see manufacturer's with novel ideas though eh? especially when it's for the engineers benefit.

[DLMURL="http://www.wolf-heiztechnik.de/en/pkp/produkte/heiztechnik/gas/gasbrennwert/cgb.html"]Gas condensing combi boiler CBG/CGB-K[/DLMURL]
 
Last edited by a moderator:
[FONT=arial,helvetica,sans-serif]Dear All[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif]IMPORTANT CHANGES FOR THE SUPPLY OF PARTS AND SERVICE FOR WOLF BOILERS IN THE UK.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif]I am writing to update you with news of an important new development for 2013.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif]With effect from today, Heat Part’n’Fix Ltd has been established by myself and will be taking over from Ubbink UK as the UK Distributor for Wolf Heating Boiler spares.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif]In addition, Heat Part’n’Fix Ltd will deal with service enquiries and will continue to support and work with the Service Agents currently on the UK Wolf database. Through my new Company, I will be delighted to continue to support you with technical expertise to enable you to continue to support your customers with Wolf boilers.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif]Our mission is to provide an efficient parts service with 24 hour turnaround on orders from our comprehensive UK stock and to enhance our services in 2013 through additional training of our Service Agents.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif]Please feel free to contact me with your requirements; we look forward to hearing from you.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT][FONT=arial,helvetica,sans-serif] [/FONT]
 
Dear All

IMPORTANT CHANGES FOR THE SUPPLY OF PARTS AND SERVICE FOR WOLF BOILERS IN THE UK.

I am writing to update you with news of an important new development for 2013.

With effect from today, Heat Part’n’Fix Ltd has been established by myself and will be taking over from Ubbink UK as the UK Distributor for Wolf Heating Boiler spares.

In addition, Heat Part’n’Fix Ltd will deal with service enquiries and will continue to support and work with the Service Agents currently on the UK Wolf database. Through my new Company, I will be delighted to continue to support you with technical expertise to enable you to continue to support your customers with Wolf boilers.

Our mission is to provide an efficient parts service with 24 hour turnaround on orders from our comprehensive UK stock and to enhance our services in 2013 through additional training of our Service Agents.

Please feel free to contact me with your requirements; we look forward to hearing from you.

so how much is a service kit trade?
 
Service Kit For CGB(K) 11-24 is £35.00 inc. vat and P&P, delivered Royal Mail, next day, registered. Service inc. Ionisation Probe + gasket and fixings, Ignition Electrode + gasket and fixings , HT lead, Burner Gasket, Combustion Chamber Seals, Silicone Lube and Manual.

Give Us a call 07778 994883 to discuss your requirements for parts, servicing and technical assistance.
 
Status
Not open for further replies.

Similar plumbing topics

I’m guessing the installer didn’t have a...
Replies
3
Views
436
I'm going to go tomorrow to switch it off for...
Replies
10
Views
693
Thanks. I'll have a look. Pakistan is not a...
Replies
7
Views
942
There is 6 pipes under the boiler and one goes...
Replies
19
Views
1K
M
Hello, We’ve recently moved into a fairly old...
Replies
0
Views
597
MartinPod81
M
Back
Top