N
Nordio
Hello all.
I have an ST-28 boiler controller fitted on a KSW i KSW plus fan assisted (40kw) wood boiler.
The controller activates the CH and HW pumps and the fan according to the manual.
The boiler manual only shows the piping configuration with a four way valve and I want to connect the boiler to a largish thermal store with a laddomat charging valve fitted plus flue stat control.
Does anyone know how to set the controller? Tech Sterowniki Sp.j. - strona g³ówna
I have already contacted the boiler manufacturer in Poland and received a reply from a second party KOTLY.COM whom I believe are UK importers of these types of products and want to know where I purchased the boiler!
I purchased the boiler from a polish guy who runs a little renewables business here in the UK and sells a few of these boilers on the side. His speciality is in a slightly different field thus my reluctance to contact him for advice and i don't think Kotly will be any help.
Have also contacted the controller manufacturer above and awaiting their reply.
Am I stuffed or can anyone help?
Many thanks.
Anyone?
I have an ST-28 boiler controller fitted on a KSW i KSW plus fan assisted (40kw) wood boiler.
The controller activates the CH and HW pumps and the fan according to the manual.
The boiler manual only shows the piping configuration with a four way valve and I want to connect the boiler to a largish thermal store with a laddomat charging valve fitted plus flue stat control.
Does anyone know how to set the controller? Tech Sterowniki Sp.j. - strona g³ówna
I have already contacted the boiler manufacturer in Poland and received a reply from a second party KOTLY.COM whom I believe are UK importers of these types of products and want to know where I purchased the boiler!
I purchased the boiler from a polish guy who runs a little renewables business here in the UK and sells a few of these boilers on the side. His speciality is in a slightly different field thus my reluctance to contact him for advice and i don't think Kotly will be any help.
Have also contacted the controller manufacturer above and awaiting their reply.
Am I stuffed or can anyone help?
Many thanks.
Anyone?
Last edited by a moderator:
