Wood Burner back boiler with gravity rad system.

[frenchy1966]

Hi All...thx for the help in advance.

I have recently installed a wood burner with back boiler heating system. Set up with gravity rad and header tank in loft.

I have a recirculation pump installed that I have connected to the rad system that I turn on and off manually.

I wanted to know how and what i need to install a thermocouple attached to the copper pipe that activates the pump when it gets to the set temperature and turns it off when it goes below this.

How does it connect to the pump, what do I need to have for this to work.

Many thanks Brian

 

[Ben-gee]

“I wanted to know how and what i need”

It’s not how and what, it’s who.

You need someone that knows what they’re doing to look over what you have already done and take it from there.

 

[frenchy1966]

“I wanted to know how and what i need”

It’s not how and what, it’s who.

You need someone that knows what they’re doing to look over what you have already done and take it from there.

 

[frenchy1966]

Very informative...........thx🙄