worcester 28i rsf combi pilot light issue???

[crusey81]

How do I light my pilot light for a worcester 28i rsf combi ? ? Thanks very much in advance

 

[macackau]

It doesn't have a pilot light. Sounds like you have a fault and need a Gas Safe Registered engineer to come and take a look

 

[crusey81]

Ok thank you for your advice I had it working again as I blew in both white and red pipes also I pressed the switch on the top but all it does is sends the pressure gauge loopy then cuts out again.

 

[ShaunCorbs]

just fyi you cant take the cover off a combi boiler

 

[townfanjon]

As Maca above says, you need a GS guy out , if you didnt before you do now .

 

[crusey81]

Ok thank you I wouldn't touch it blowing in the pipes is as far as I go :smile5:

 

[macackau]

Waits for Croppie…

 

[lame plumber]

if your pressure gage is 1 to 1.5 bar when the boiler is cold, then u need a gas technician to investigate the fault. However if the pressure has dropped well below 1 then you have to repressurise the heating system, normally with a filling loop and key under the boiler. bring it up to 1 bar and the boiler should start working again. if pressure drops overnight, time to get a technician out to do a repair

 

[crusey81]

It has just went out but then come back on again the misus is on the blower to get someone out to it thanks for all your help guys.

 

[crusey81]

The button at the top keeps popping up and when I press it down it comes back on what is causing this ? Sorry I am only asking so I have a rough idea what to say when someone comes out

 

[lame plumber]

try hello mate boiler wont work, that will be enough for a technician to start off with.......................

 

[PlumbBobBob]

as said please don't mess with your boiler you don't know what you're doing and could do way more harm than good. thread closed.