Worcester 30si - electrical problem | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Worcester 30si - electrical problem in the Plumbing Jobs | The Job-board area at Plumbers Forums

Dutchie79

Gas Engineer
Messages
29
Hey guys

Me mucho confusamondo

New install May 18 - in old oil boiler location - spur unit in kitchen that was beside time clock kept - new spur unit fitted out beside boiler - all by spark

Get call out 1 week later - no power to boiler - no power to spur beside boiler - opens face and power on supply and on load - but also power on neutral - changed spur unit - all good! Must be dodgy spur - right?

Call out yesterday - same thing - strange - no spur and a spur in house - so used strip connector to get it going - and went to shop and bought spur. Came back 1 hour later and no power again and neutral live.

Turned boiler off and waiting on electrician.

Question is can a pcb fault throw the live down the neutral intermittently - spark is gonna come and charge me for changing spur inside and spur outside and checking wiring to board - no issue with that - but I feel it may be the boiler pranking me !!!!

Anyone any experience of such ?

Many thanks in advance
 
Get the spark back who fitted the first spur

L - n 240
L-e 240

If you don’t get 240 from live to neutral but you do on live to earth you’ve lost your neutral eg broken / loose connection
 

Similar plumbing topics

Thanks for the input on this, much...
Replies
4
Views
980
W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
762
D
No it won't You need a gas safe engy now
Replies
4
Views
1K
Hi ShaunCorbs, thanks for the reply. The pump...
Replies
2
Views
2K
Nest setup hi John can you send me a pic of...
Replies
4
Views
4K
Jamone B
J
Back
Top